Testé et Approuvé

Dès le départ, le développement de X-Tray s'est concentré sur la création d'une marque haut de gamme dans le domaine des systèmes de chemin de câbles. Nous avons créé une marque haut de gamme en ce qui concerne le design ultime, la fonctionnalité, les matériaux et le service. Nous apprécions les clients dont la demande est élevée car cela nous permet de développer continuellement des solutions sur mesure.

X-Tray s'adapte à tous les environnements !

Dès le début, le développement de X-Tray s'est concentré sur la création d'une marque haut de gamme dans le domaine des systèmes de chemin de câbles. Pour garantir une qualité supérieure constante, nous effectuons continuellement des tests sur nos produits. Pour en savoir plus sur le test au feu E90, la norme IEC 61537 et le test de liaison équipotentielle, consultez les encadrés ci-dessous.

X-Tray a été testé et certifié pour résister

    • Material
    • Welding
    • Load
    • Identification
    • EMC
    • Nettoyage intensif
    • Vibrations
    • Feu

* Our UL certification also gives us NEMA APPROVAL.

Choix du chemin de câbles

Tenez compte des points suivants lors du choix du chemin de câbles adapté


Environment- demand on surface treatment and/or classification of installation based on standards, given by use, area or specified demands.


Installations: wall, from ceiling or on floor.



Longer distance between supports - less work and costs.



Weight and volume of cables, consider future needs. 


Additional weight from point loads. 


Tested for equipotential bonding. 


During a fire it is important that certain things maintain their functionality. This could involve the activation of alarm system, emergency lighting, sprinkler system and smoke detectors, or other things that could save lives during a fire. This could be a long list. It is always a good for wire trays to withstand a fire for as long as possible. 

The German DIN 4102-12 standard is used for testing this, a standard that is designed to test complete systems of wire trays, accessories and cables. Wire trays and cables are put in an oven and heated for 90 minutes until the temperature has reached 1000 degrees Celsius.

To be approved the cables must still be in a usable condition.  Approval comes in three classes: E30, E60 and E90, this is for how many minutes the wire trays and cables are still functional. 

X-Tray has been approved at the highest class, E90. We carried out the test at IBMB (Institut für Baustoffe, Massivbau and Brandshutz) i Brauswieg, Germany. IBMB is a prestigious, independent testing institute that issued the approval in accordance with the DIN 4102-12 standard. The trays, brackets and cables were approved together. We have tested several batches of wire trays in combination with several different cables.


IEC 61537

Cable management – IEC 61537 - Cable tray systems and cable ladder systems.

“This International Standard specifies requirements and tests for cable tray systems intended for the support and accommodation of cables and other electrical equipment in electrical and / or communication systems installations”. 

The strength of the wire trays and mountings makes their installation simple, strong and economical. Support distance can be increased, therewith reducing the amount of installation work and overall costs.

Our diagram shows the recommended load in accordance with IEC 61537. 1.7 times these values gives the maximum permitted load.

Equipotential bonding

Tested for equipotential bonding in compliance with IEC61537

In some installations the wire tray needs to be equipotentially bonded. This is to secure protective bonding or functional bonding.

Protective bonding 
The main reason for protection bonding is to protect against electrical shock that could be caused by faults in the electrical system. This is remedied by connecting the wire tray to the main earth terminal in the building.

Functional bonding
This is done to minimise the impact of electrical and magnetic fields (EMC). It is carried out in the same way as with protective bonding, i.e. by connecting the wire tray to the main earth terminal in the building.

Requirements and tests
The IEC 61537 standard lays down the requirements placed on a wire tray to ensure electrical continuity. Among other things, the impedance must not exceed 50 mOhm over joints or 5 mOhm X number of meters of wire tray.  X-Tray has been tested and complies fully with IEC 61537. The tests were conducted by the Research Institute of Sweden (SP) with test report numbers PX16030 and 5F015879.

NB. X-Tray wire trays must never be used as protective bonding conductors, earth conductors or any other type of protective conductor. 

EHEDG member

Axelent is one of the 1,300 members of the European Hygienic Engineering and Design Group. EHEDG was founded in 1989 and is a non-governmental organisation aimed at promoting hygienic design and food technology, ensuring safe products to the consumer.

This is done using standards, recommendations and certifications written and produced by members from different areas: equipment manufacturers, food industries, research institutes and public health authorities.

With our membership, we want to show that we care about you and the products that are produced in the food industry and pharmaceutical industry. With safe and well-adjusted products to specific environments, it becomes easier for you as a customer to choose the right one and focus on what is produced.

Axelent Xperience

Visitez notre salle d'exposition virtuelle et découvrez nos produits dans leur environnement approprié.

Dans notre salle d'exposition virtuelle, vous pouvez découvrir la gamme Axelent dans son environnement approprié, où que vous soyez dans le monde. Découvrez nos produits en naviguant entre la production, le stockage, l'entreposage, l'entrepôt automatisé et l'expédition. Si quelque chose de spécial vous intéresse, cliquez simplement sur le produit pour en savoir plus. Regardez un film, lisez un article et apprenez-en plus ! Nous pensons que vous l'aimerez autant que nous !